| |
 VIBRATING SCREEN
BEW manufacturing vibrating screen in different sizes
and models having single, double, tripple deck depending
upon the requirement of customers. These screen are
heavy duty type working on principal of circular motion
and designed for longer life services and minimum
maintenance like regular lubrication of bearing and
change of screen plates when necessary. The screen slope
is kept 150 to 250 as the case may be. The slope can be
adjusted according to situation. Vibration can be
adjusted simple by adding or removing counter weight
plates corresponding degree of speed.
Standard Specification:
BODY FRAME : The
main frame is fabricated from M.S plates, angle,
channels and is welded construction with feed discharge
hoods as in integral part.
SCREEN PLATES : The
screen plates are drilled perforated plates of
appropriate size for proper separation of desired
fraction. The screen plates is bolted to cross Members
connecting to screen side plate with necessary lock
washer or U- Clumps.
VIBRATOR ASSEMBLY :
The vibrator Assembly comprises of shaft unbalancing
Weights, Driven, V-pulleys, Bearings, Bearings housing,
Central Pipe Casing. The shaft is supported on heavy
duty bearing. The bearings are totally enclosed grease
lubricated. The vibrator body is fabricated from pipe
with two end housing and bolted plates. The housing are
bored to accommodate bearing. The shaft is housed in the
assembly with covers. The bolting late is fixed on the
frame.
SUPPORTED SPRINGS :
The complete screen frame is supported by four sets of
compression type coil springs. These simple supports
keep vibration transmission to supporting structure to a
minimum.
L – length
W – width
H – height |
|
